Home Blog Page 312

How to Trip with Toddlers

Photo: Hap Wilson

This technique article originally appeared in Canoeroots and Family Camping magazine.

One of the toughest quandaries I had to overcome when deciding to have kids was the fear that I would have to curb my outdoor pursuits. I soon learned that kids are malleable; they can adapt to, and enjoy, just about any outdoor adventure when their basic needs are met.

Route Choice: This is wholly dependent on the temperament of the toddlers. Start with short day trips, then lengthen them accord- ingly, but don’t be afraid to think big. I took my two- and three-year-old kids on a 450-kilometre trip on Ontario’s Albany River. During those two weeks, plenty of gorp breaks and beach stops kept the kids happy, even on some 50-kilometre days.

Diapers: I generally despise disposables, but admit they are a godsend on canoe trips. You’ll need a barrel lined with garbage bags for either soiled disposables or dirty cloth diapers. The key is a liberal sprinkling of baking soda to keep the smell down and bears away.

Toys: Make room in the canoe for another small barrel full of toys, games and stuffed animals. Having these diversions readily available is essen- tial. Kids drop stuff overboard constantly, so you may want to tether in any “on-the-move” play toys, or risk perfecting your pivoting strokes.

Tents: A larger tent is a must. It’s a great play-place for toddlers and kids and will be well worth the extra effort it takes to pack it and carry it around when the bugs or weather are bad. A “family-bed” of sheets and throw blankets works best when toddlers need the security of their parents. Introduce toddlers to their own sleeping bags, and eventually an adjoining tent when they are ready, but if you rush it you’ll find they would rather stay home.

Bugs: Some might say I was cruel, but when my kids were toddlers I let them get bitten a little just to strengthen their immune systems. Today, black flies and mosquitoes don’t bother them, at least not enough to ruin an outing. That being said, some measures are sensible. I used to set up a light mesh tent at the end of portages where my wife and ba- bies could escape to while I carried over the gear. Sheets of loose bug netting can be draped over kid-carriers, and bug jackets are essential once they are a few years old. Don’t slather your kids with caustic repel- lent! A light dab of Tiger Balm, orange rind or citronella on the exposed backsides of their hands works well.

Safety: Your job is to plan well and remain calm if things get tense; your kids will pick up on neurotic behaviour and it may sour the next trip. As usual, safety comes down to attentiveness and common sense—don’t tether your kids to the canoe thwarts! There are excellent baby and toddler PFDs on the market. Make sure they wear them at all times, even around the campsite.

Invest some energy in making sure your kids travel in comfort and security when they are young and by the time they are seven or eight they will carry their own packs, paddle with efficiency and be full partners in your outdoor pursuits.

This article originally appeared in Canoeroots & Family Camping, Fall 2009. Download our freeiPad/iPhone/iPod Touch App or Android App or read it here.

3 Tricks For Climbing Back Into A Raft

For when things get wild. | Photo: Destination Ontario

So you find yourself out of the raft and in the river. Getting back in ASAP is almost always your first priority. If the raft is upright and somebody is still inside, he or she can just haul you in, but climbing back in on your own is more of a challenge.

How do you get back into a raft? Follow these steps for two different scenarios.

[ Paddling Trip Guide: View all rafting trips ]

If the raft is upright

If the raft is upright, grab the side perimeter line on either side of a D-ring.

Trick #1

Push out with straight arms and kick your feet to get them to the surface. Don’t try to climb in until your body and feet are at the surface and your arms are extended. Then, with strong kicks and a swift pull, travel forward and up—you need momentum to get your upper body over the tube.

Trick #2

The other option is to turn your forward pull into a downward push, keeping your hands on the line until you are straight armed again, wrapping your upper body over the tube. Only then do you reach into the raft for a new handhold, likely grabbing a cross tube or the raft frame. Strong kicks this whole time keep you from stalling halfway.

Man leaning into raft

If the raft has flipped over

Your approach to how to climb in a raft when it’s flipped over is a little different. The trick is to work from the end where the floor angles down into the water like a ramp, using the floor lace as a handhold. Be warned: the hold isn’t great. Once you’ve climbed onto the bottom your job is to flip the raft over, but that’s another story.

This article originally appeared in Rapid‘s Summer/Fall 2012 issue. Subscribe to Paddling Magazine’s print and digital editions here, or browse the archives here.


In-text photos by: Dan Caldwell

Going Tidal Kayak Technique

Photo: Bryan Smith
Surfing Bay of Fundy tidal race.

This kayak technique article on how to paddle in tidal races was originally published in Adventure Kayak magazine.

On one of my early training trips to Anglesey, Wales, I was paddling out toward Penrhyn Mawr and the biggest water of my life when Nigel Dennis calmly paddled up beside me and said, “Remember, it’s the sea. It’s always worse than it looks.” Unsettled, I watched a two-meter swell roll through the Irish Sea and collide into four knots of current.

In the exploding waves my “highly maneuverable” 16-foot sea kayak felt like a fish in molasses. I’d sweep five or six times to get lined up with a wave; it would break and push me sideways and then I’d have to start all over again. I was all at once frustrated with my boat handling, nervous about the sea state and excited about being there.

The last few years have seen more and more paddlers enjoying tidal races like Penrhyn Mawr, Skookumchuck Narrows, Shubenacadie River, The Bitches, Deception Pass and others. Like paddling in the surf or wind, tidal water presents lots of mental and physical challenges and an equal amount of fun. Here are some basic concepts to ease you into the excitement of tidal rapids, including skills you can practice on flatwater anytime.

Paddle anything that moves

If you don’t have access to a tidal race—or even if you do—start out by paddling river whitewater at a moderate grade such as Class II. You’ll be surprised how accessible whitewater is and how much it improves your sea kayaking skill. This is one of the best ways to fast-track the water-reading skills you’ll need in tidal rapids.

Learn the environment

Perhaps the single most important skill in tidal race paddling is predicting how the water is going to affect your boat. Water- reading skill-level is directly proportionate to your cockpit time in moving water, so don’t get too frustrated if you can’t put your boat exactly where you want the first time.

Seek mentors to push you

To be an effective and efficient paddler in tidal races, you have to be comfortable and confident. The best way to safely increase your confidence is by paddling with coaches and peers who are capable of taking you into environments that are beyond your comfort level when paddling alone. With others covering the safety and leadership, you can experiment and learn.

Err on the side of edging

Get comfortable with spinning the boat 180 degrees with a series of forward and reverse strokes on flatwater. Edge the boat towards each sweep, using the stroke for support and balance. Increase the amount of edge as far as possible on flatwater. This will teach you to trust a more aggressive edge in moving water.

Chaos-proof your roll

When you add current to the equation, the potential for spending time in a low-oxygen, wet environment increases exponentially. A bombproof roll goes a long way to increasing your confidence and ability to perform. Practice by adding chaos to your flatwater roll practice: flip over mid-stroke and set up for a roll, but allow yourself to fail, capsize again and then switch to roll up on the opposite side; try flipping over with only one hand on the paddle—but first get a good pair of nose plugs.

Ease into leadership

Safe group management is critical in tidal races. Assuming that on the first several outings you have surrounded yourself with strong leaders and coaches, when your confidence increases it’s time to think about safety and leadership yourself. Assess the risks of the tidal venues you would like to paddle, considering the potential dangers as well as the best flows and tides, and whether you and your partners have the skills to resolve any situation that might arise.

BRYAN SMITH is a filmmaker and paddler in Squamish, British Columbia (www.reelwaterproductions.com).

This article originally appeared in Adventure Kayak, Early Summer 2009. Download our freeiPad/iPhone/iPod Touch App or Android App or read it here.

Matt Anderson’s Big Sheep

Matt Anderson's Big Sheep

Pirate of Lynnhaven, Matt Anderson, pulled this 11.75 pound sheepshead out of the pilings of Chesapeake Bay Bridge Tunnel.

Canoe Rescue Technique

While there is no one perfect way to deal with an swamped canoe there are a few techniques that work better than others depending on the situation. This parallel rescue is a great one to practice and learn because it can be adapted for a variety of situations.

Autumn Solitude

Photo: Brad Badelt

Long after you’ve paddled through the summer, as the warmest of seasons fades into your wake, the fall – perhaps anxious not to be forgotten – begins a visual celebration. Slowly at first, the earliest trees begin to yellow, eventually joined by those around them. Maples turn a vibrant red, reminding Canadians just where their national colours come from.

Though the waterways may be quiet, they are just as welcoming. For canoeists like Brad Badelt, a paddle along part of the Magnetawan Loop in Ontario is one of the many pleasures of the fall season.

Labrador Plateau Canoe Trip

Photo: Frank Wolf
Labrador Plateau Canoe Trip

It’s July 22, 2012. I’m only halfway there, carrying the canoe up a three-kilometer-long, 1,500-foot-high portage. A storm of black flies keeps me company and have bludgeoned me to the point where the protective shirt wrapped around my head is soaked in blood. The temperature in the windless Poungasse Valley has crept to 30 degrees Celcius and sweat mixes with blood, running in a pink stream down my chest. We’re trying to crawl out of this chasm to reach the expansive Labrador Plateau. “Shoot when it’s hard,” they say. It’s showtime.

I drop the canoe on the tundra, pull the camera out of the case strapped to my chest and go to work. First, a close-up zoom and comment on my beaten face and the general situation. Next, run ahead 20 meters to set up the camera on a tripod for a third-person perspective of the carry. Finally, flip the canoe back on my head, grab my little point-of-view (POV) camera and turn the lens to my face before continuing to march uphill past the tripod. Drop the canoe again, pack up the camera gear, pop the canoe up and carry on with the journey.

Doubling back down the mountainside I meet up with Todd. He’s been seized with heatstroke and is on the verge of puking. Of course the camera comes out. I interview him about how he feels, then set up the tent so he can escape the black flies, hydrate and sleep off his condition. He drops into the shelter and immediately conks out for three hours. I tell the camera what’s happening and then film his passed-out body from an aesthetic angle shot through the tent screen that initially focuses on him before fading to a foreground of no-see-um mesh. I put away the electronics, grab a couple of bags and start back up to the canoe. So goes day three of a 620-kilometer, 21-day expedition and film production through Nunatsiavut and Nunavik with my friend Todd McGowan.

As an adventure filmmaker, this is just a typical day juggling the duties of director, videographer, editor, producer, expedition leader, camp cook and sherpa. Working within this creative box, I try to create intimate portraits of the landscapes I pass through. With national broadcasts of my past three productions, I’ve managed to scrape along from one project to the next.

To avoid burnout, I take an occasional break from filming. In 2010, I completed a canoe trip to Hudson Bay without my cameras and it was bliss (read an account of this trip in Canoeroots, spring 2012, www.canoerootsmag.com/0040). I basked in the experiential simplicity of that adventure—just a friend, a canoe and the boreal forest. Then I struggled with committing to film my next adventure. 

I knew that I wanted to use film to show the interconnectedness of life in Labrador, but the all-consuming process of shooting a layered, broadcast-worthy movie about a tough expedition is like adding the logistical complexity of a third person to the canoe. In terms of energy and effort, it’s like bringing a toddler along. On the other hand, films I’ve made in the past have always been deeply rewarding. The tug of war in my mind didn’t end until the morning we left Vancouver for Goose Bay. The third person was coming. 

Labrador is a vast region, the most eastern part of Canada’s mainland, and home to more caribou than people. North of its southern towns there are no connecting roads and the only way up is by plane or ferry. 

With our canoe on board, we take the MV Northern Ranger on a two-day voyage along the coast to its terminus at the Inuit village of Nain. This community is my only chance to get the Inuit perspective of the land. Nain is the capital of Nunatsiavut, the Inuit region that comprises northern Labrador.

Filmmaking is a journey that parallels the canoe trip—you have an idea of where you want to go but never know exactly what, or who, is around the next corner. Unknown twists and turns are where adventure and inspiration arise. Likewise, the camera and the canoe are powerful tools if you have a purpose and mission. Both invite local populations to share ideas and stories they otherwise wouldn’t tell. I immediately begin hunting for relevant interview subjects.

Sarah Leo is the recently elected President of Nunatsiavut. I ask her about the area we’re to canoe through. She laughs heartily and says, “That’s not an area people go in the summertime—partly because of the difficult access…but mostly because of the flies.” I’ll use this quote in the narration of our buggy portage up the Poungasse a few days later. One interview down.

From Nain, it’s 238 thick kilometers to the George River in Nunavik and after speaking with Leo, I want to know if the rest of the locals think what we’re doing is rational, mad or somewhere in between. In a grassy field along the shoreline, I interview Johannes Lamp, an experienced hunter and local politician. He encourages and discourages me at the same time. “It will be difficult…but if you are determined, I think you can make it.” A nice bit of narration to lay over the portage footage, I think. In just a few hours I’ve managed to grab the local commentary I need to give context to the first leg of the film. 

Though the Inuit and Innu have been roaming these lands for millennia, British explorer Hesketh Prichard is the only known person to have crossed over the Labrador Plateau from Nain by canoe. He paddled—then abandoned his canoe and hiked—a route north of ours over a hundred years ago. Back in Vancouver, I’d looked at the maps and crafted a route that I thought made more sense than Prichard’s. Here’s hoping. 

On July 29th, Todd and I huddle behind a monolith on the shore of a large, unnamed lake while we wait for a heavy head wind to ease off. That’s the thing with the Labrador Plateau, it’s either windy or it’s buggy. Though it’s pleasantly bug-free behind this hunk of rock, we’re just sitting. 

Progress has been slow since we crested the Poungasse and gazed across the Plateau’s moonscape of rock and heather. Many of the rivers and lakes shown on our maps are severely shallow, boulder-choked and unnavigable. As a result, we’ve had to be content with dragging slowly over the tundra with short spurts of paddling across small lakes. Averaging only 12 kilometers or so per day, it’s been a grind. 

The wind across the Plateau doesn’t make it practical to carry the canoe so I’ve had to drag it overland with a line harnessed to my PFD. In the past week I’ve shot every conceivable dragging angle possible, to the point where the leading candidate for the film’s title is Dragging my Canoe across Nunatsiavut: A Fool’s Journey.

Groping for a fresh perspective, I pull out the rubber mosquito mask I’ve made for this trip. I slip it over my head and strip down to my briefs. Having recently filmed super close-ups of mosquitoes and their natural movements as they crawl over various parts of my body, I begin filming a sequence where I crawl, mosquito-like, around the tundra that will fade into a shot of a mosquito doing the same in the film.

On a deeper level, I want this film to illustrate the interconnectedness of all living things in the region—this scene will bridge the gap between man, mosquito and everything in between. The Inuit spoke of this connection during my interviews in Nain—though it’s unlikely they foresaw it this way. 

Finally released by the Plateau several days later, we paddle into the crystal clear, brook trout-laden Natikamaukau River. This waterway is a privilege to descend as very few, if any, people have done so before. The Natikamaukau is 22 kilometers long and drops 400 feet from its source, snaking through water-smoothed rock slots down a deep valley framed by high, barren ridges roamed by caribou and black bear. It eventually spills into the oft-travelled George River, which we’ll ride north to our finish in Ungava Bay. 

Todd is waiting with the canoe at the top of a class III rapid while I set up a fisheye lens on a bluff to get an overhead view of the run. Mounted on the back of the canoe is the POV camera set up on a three-link boom called a Magic Arm so both of us are in the shot. Often used as a lighting mount in studio work, the arm is the perfect device for shooting canoe films as it can be clamped anywhere and at any angle on the gunwales or thwarts. Having at least two unique perspectives of the same rapid is key to making a dynamic sequence. I don’t portage back up rapids to re-do shots so this is a one-shot deal.

I give Todd the signal, press record and scramble over the rocks, bash through the shore alder, splash through the shallows and hop into the canoe. With the POV camera rolling, I tuck into the spraydeck and we’re off.

The canoe slips into the current and we engage the river. I forget that I’m filming and enjoy the moment as a series of standing waves crash over Todd in the bow. We side-slip a series of pillow rocks before peeling safely into an eddy behind a large boulder.

After a bit of euphoric hooting and hollering, I hop out, scramble up the embankment and run 100 meters back to the still-running camera. In my mind I can already see how I’ll cut the scene when I get home. Surrounded by the barren splendor of Nunavik it dawns on me that this is a pretty good office—and I’m glad the third person came with us on our journey. As film and trip draw closer to conclusion and destination, I realize as both a filmmaker and adventurer, I couldn’t ask for anything more than this.

Frank Wolf is an adventurer and filmmaker who specializes in environmental documentaries. He lives in Vancouver.

This article was originally published in the Spring 2013 issue of CanoerootsThis article first appeared in the Spring 2013 issue of Canoeroots Magazine.

 

Mountain Biking for All Ages

Photo: Rob Faubert
Mountain Biking for All Ages

Whether mountain biking is your middle name or something you’ve discovered in middle-age, trail riding is a fun-for-the-whole-family activity that puts a spin on weekend camping. From behind the bars, kids will find navigating trails a new adventure. This go-to guide will help you choose the bikes, trails and gear to suit even the littlest rippers.

BIKE FIT: THINK LITE

Kids learn more quickly and enjoy riding more when they’re on well-designed, well-built bikes. Most major bike manufacturers, such as Specialized, Trek, Rocky Mountain and Norco, now offer decent kids’ bikes in 16-inch, 20-inch and 24-inch wheel sizes. Designers take height, weight, proportions and strength of kids into consideration. Being able to apply the brakes and shift the gears with smaller hands is key to enjoying the experience and being able to trail ride as a family. 

“When you’re choosing bikes for kids, weight is the biggest factor,” suggests Duncan Beard, bike guru and bike racer from Fresh Air Experience bike shop. Lighter bikes are simply easier to pedal and allow kids more control, which is especially important if you’re heading over the hills and far away.

As a guideline, Beard recommends bikes weigh no more than a third of a child’s weight. “If your kid is less than 100 pounds, their bike shouldn’t weigh more than 30 pounds.” He encourages parents to forgo shocks for kids under 10 years old to save weight. 

This, however, is easier said than done, found Canoeroots publisher Scott MacGregor. “The best kids bikes we could find weighed more than our adult-sized bikes. It hardly seems fair.” Frame size isn’t as much of a factor as the rest of the bike’s components. “There is a big difference between department store bikes and good quality, $500 kids’ mountain bikes,” says MacGregor, “but it’s still a far cry from what’s standard on a $1,500 adult mountain bike.” If you’re really serious about setting up your kids with lighter weight bikes, MacGregor suggests looking at racing BMX models or starting with an aluminum-framed mountain bike and making a hobby out of upgrading parts. 

It seems like a no-brainer, but Beard also advocates for selecting a bike that fits. “If you get a bike that you hope they’ll grow into, it will be hard for them to ride it and enjoy it now,” he says. 

Well-made bikes are worth the initial investment. They come with components that operate more smoothly and require less maintenance than anything from Walmart—think more riding and less tinkering with shifters and brakes. A good new bike will last to be handed down through siblings or can be sold or traded when the time comes to upsize. 

PUMP UP FOR TRAILS

Kids deal with frustration and fatigue differently depending on their endurance, ability and temperament. Figure out how fast, how far and how long your kids are ready to bike by taking interesting rides close to home. A few of these will help you plan realistic weekend adventures. With kids, distance is often less of a factor than time in the saddle. On days when there’s heat, rain, steep hills or bugs, assume that part of your children’s stamina will be spent on coping with their environment. 

It’s up to parents to keep an arsenal of distractions, diversions and motivation in their pack pocket to dole out and keep spirits high. Try sing-a-longs, games, snacks or exciting destinations along the way—anything to avoid hearing, “How much further?” 

Every child is different of course, but experienced kids around the age of six are usually able to last about 45 minutes on their own, over gentle terrain. Double that if they’re riding behind you on a trail-a-bike. For many experienced 10-year-olds, an hour and a half on their own bike is no problem. Almost everyone prefers a loop to the repetitiveness of an out-and-back route. 

“Most adults want to set goals, in terms of distance, time or effort and that’s not going to work with kids,” says Lee McCormack of Boulder, Colorado, author of Teaching Mountain Bike Skills. “The terrain shouldn’t be threatening at all,” he advises for newbie kids. “We want to imprint positive experiences, so keep it very mellow.” He adds that completely flat trails aren’t ideal because kids love to coast down hills, instead, opt for moderate grade, simple open track, with some rocks to make things interesting. 

McCormack is a father of twin three-year-old girls. He got his kids started on Strider bikes when they were just 18 months old. “They just chewed on them at first, but when they were two, they wanted to ride them.” McCormack advocates pump tracks—mini, circular, off-road routes that take riders over bumps and through tight corners and can even fit inside a backyard. “Parents don’t want to give up riding but can’t take their kids on a three-hour, cross country, Type A mission,” says McCormack. “Pump tracks are the answer. They’re a great place to hang out and there’s a huge benefit in terms of athleticism and fitness.”

Pump tracks are like a low-key BMX track from the ‘80s and they’re springing up in municipal parks everywhere. There’s probably one near you. Before hitting the trails, laps at a pump track can help your kids learn to corner on berms and pedal hard up steep rollers. No one gets left behind at the pump track and kids can stop for a snack or play whenever they want.

SMOOTH, FLOWING TRAILS ENCOURAGE ENW RIDERS

 

Now that there’s a trail the whole family can enjoy, trailbuilder Ted Ferguson has noticed a huge increase in the number of ski families out mountain biking at Mont Ste-Marie, north of the city of Gatineau, Quebec. 

“The very first trail the other dads and I built goes straight down a steep hill. It’s pretty advanced,” laughs Ferguson who obtained a grant to build a five-kilometer beginner mountain bike loop. “If a family is looking to mountain bike, trail conditions are an absolute priority. Rooty, swampy, rocky or too steep isn’t fun for a lot of young kids, especially if they’re just getting into biking.” Everything is to scale. Two-inch roots and rocks we roll over are a much bigger deal on a bike with small 20-inch wheels, he says.

In order to make the trail fun for kids and beginner riders while still offering challenges for advanced riders, Ferguson and trail builders across the country are making smooth trails and adding berms at every turn. 

“You need flow and fun. Challenging, but not too challenging,” says Ferguson who carries his younger son’s bike up hills to hook the boy on downhill thrills. “The berms turn the trail into a roller coaster that kids love. And it creates a beautiful, fluid sensation for experienced riders,” he adds. 

FUEL UP

Food that’s filling and delicious and stays appetizing after being jostled in a backpack works best. Hard-boiled eggs, hummus and veggies, apples, wraps and treats like cookies or granola bars will be favorites.

Don’t overthink your food selection, whatever you would usually bring on a hike works on a bike ride. Avoid energy goos or fancy sports bars that are marketed to endurance athletes. Many of these products contain caffeine as a performance-enhancing ingredient and are not appropriate for the younger set.

BIKE BASE CAMPING

The perfect bike weekend campsite offers lots of opportunities for the kids to relax and play. If you’re staying in a campground, choose a site close to a beach, a big soccer field, a playground with a fun set of monkey bars or any other interesting features. Especially after using a lot of balance and control on the bike, kids need to let loose and play in the evening. 

Choosing a campsite close to the trails means adults can take turns hanging out with the kids and heading out for their own quick, intense trail rides. 

Don’t put the bikes away after the trail ride. Riding the paths around the campground may be even more fun for them. “We set boundaries, remind them of cars, hand them walkie talkies and they’re gone,” says MacGregor. “Riding a bike is the closest to real freedom a kid can get.”

Kathleen Wilker and her family are avid cyclists. In 2010 Kathleen was awarded the City of Ottawa’s Bruce Timmermans Award for cycling education and promotion.

This article was originally published in the Spring 2013 issue of CanoerootsThis article first appeared in the Spring 2013 issue of Canoeroots Magazine.

 

Betcha Didn’t Know About…Crickets

Photo: istockphoto.com
Betcha Didn't Know About...Crickets
  • A cricket’s ears are located just below the knees on its front legs.
  • The higher the temperature, the faster a cricket chirps. Estimate the temperature in Fahrenheit by counting the number of chirps in 15 seconds and adding 37.
  • Jiminy Cricket was inspired by the Talking Cricket from the original Pinnochio book on which the Walt Disney movie was based. In the book, Pinnochio kills the cricket shortly after meeting him because he doesn’t like what the cricket has to say. A fine conscience he turned out to be.
  • Male crickets chirp by rubbing the top of one wing against teeth that run along the bottom of the other. Female crickets do not chirp.
  • In 1939, England played South Africa the longest cricket match ever—it lasted 14 days and ended in a tie.
  • Crickets are a symbol of good luck, wisdom and prosperity in Chinese, Japanese and Native American folklore.
  • Buddy Holly’s back up band was called The Crickets.
  • The practice of eating bugs is called entomophagy. Crickets are considered a tasty treat in many cultures and are an excellent source of protein, iron and calcium.
  • Despite having wings, crickets rarely fly.

This article was originally published in the Spring 2013 issue of CanoerootsThis article first appeared in the Spring 2013 issue of Canoeroots Magazine.

 

Skill: The No-Match Fire

Photo: Michael Mechan
Skill: The No-Match Fire

The one-match challenge—Boy Scouts, survival nuts and shipwrecked folks everywhere pride themselves in being able to build a source of heat, light and comfort using one single match. But if your motto is “Be prepared,” why would you ever be stuck with just one match? The marooned have a better excuse. Wind and water make match fires difficult, though, so why not take it one step further and go for the no-match fire?

 The theory remains the same as with a one-match fire. You need to start with excellent tinder—like birch or cedar bark, wood shavings, cotton balls dipped in Vaseline or spilled jet fuel. Kindling comes next—small branches no thicker than your thumb or forlorn FedEx packages. If it snaps when you break it, it’s dry enough to burn. Once you get your no-match fire going with a sustained flame, you can add progressively bigger firewood.

Now for the fun part. Lighting a no-match fire is easy. You won’t need to build a bow drill contraption or mine for quartzite to bang together. We have the technology. In adverse conditions, turn to a stormproof lighter to produce flames with the intensity of a blowtorch. Try the Trekker from Ultimate Survival Technologies ($60; ultimatesurvivaltech.com). 

Stormproof lighters reach 2,000°F, can withstand 80-mile-per-hour winds and survive a dunk. Unlike a lone match, a full tank of butane should last up to 30 minutes and the electric starters are good for 30,000 ignitions—that’s a lot of no-match fires.

If a stormproof lighter is a little too 21st century for you, how about a no-match fire-lighting technique discovered thousands of years before matches? A flint and firesteel like the FireSteel 2.0 Scout from Light My Fire ($15; lightmyfire.com) is another excellent tool. Drop them in the lake and they still work fine. They’ll also spark in high winds. Hold your flint about 30 degrees to your tinder and strike hard and slow with the steel. Voila!

Like with a one-match fire, the amount and positioning of your tinder and kindling is what matters most. All that’s left now is to celebrate by dancing around the flames with your deflated companion, Wilson.

This article was originally published in the Spring 2013 issue of CanoerootsThis article first appeared in the Spring 2013 issue of Canoeroots Magazine.